Steps in performing Offline Decryption in Station Manager

1.	In the Action selection  above the receive window pull down the menus and select "Copy RX to clipboard"

2. 	In the Open selection above the receive window pull down the "Off-line Emcryption"

3.	in the Off-Line encription window select "Accept"

4.	 In the new window select the appropiate Pat File  "Pat 1File  ZYG - Pat 2 File ZYG"

5.	Select "Process Keys"

6.	Sekect the approiate Key Index "" April = 4"

7.	Select the Cipher Window and right click and select "Past"

8.	You wil see the complete message from you copy of the message in step 1.

9.	Delete all of the lower part of the message upto and including the BT.

10.	Scroll upnd find and page breaks and delete the to bring the ciphertext  on the bottom up to bottom of the ciphertxt on top.

11.	Scroll up tho the header and delete all from the top of the message to BT.

12.	Make suer that the first 8 char block is the same as the last 8 char block.

13.	Select the "Decrypt Cihhertext into Plaintext" box.  If all is correct wala you will see Plaintext in the upper box.

Note: if your rx text has missing char or bad chars you can replace the whol blocx with 8 Xes (XXXXXXXX) and this will allow you to recover the nessage.